Journal cover Journal topic
Geoscientific Model Development An interactive open-access journal of the European Geosciences Union
Journal topic
GMD | Articles | Volume 12, issue 9
Geosci. Model Dev., 12, 3939–3954, 2019
https://doi.org/10.5194/gmd-12-3939-2019
© Author(s) 2019. This work is distributed under
the Creative Commons Attribution 4.0 License.
Geosci. Model Dev., 12, 3939–3954, 2019
https://doi.org/10.5194/gmd-12-3939-2019
© Author(s) 2019. This work is distributed under
the Creative Commons Attribution 4.0 License.

Model evaluation paper 06 Sep 2019

Model evaluation paper | 06 Sep 2019

Evaluation of WRF-DART (ARW v3.9.1.1 and DART Manhattan release) multiphase cloud water path assimilation for short-term solar irradiance forecasting in a tropical environment

Evaluation of WRF-DART (ARW v3.9.1.1 and DART Manhattan release) multiphase cloud water path assimilation for short-term solar irradiance forecasting in a tropical environment
Frederik Kurzrock1,2, Hannah Nguyen2, Jerome Sauer2, Fabrice Chane Ming3, Sylvain Cros2, William L. Smith Jr.4, Patrick Minnis4, Rabindra Palikonda4, Thomas A. Jones5, Caroline Lallemand2, Laurent Linguet6, and Gilles Lajoie1 Frederik Kurzrock et al.
  • 1Institut de Recherche pour le Développement (IRD), UMR 228, ESPACE-DEV, Université de La Réunion, Saint-Denis, La Réunion, France
  • 2Reuniwatt SAS, Sainte Clotilde, La Réunion, France
  • 3Laboratoire de l’Atmosphère et des Cyclones, UMR8105, UMR CNRS – Météo-France – Université, Université de La Réunion, La Réunion, France
  • 4Climate Science Branch (E302), NASA Langley Research Center, Hampton, Virginia, USA
  • 5Cooperative Institute for Mesoscale Meteorological Studies, University of Oklahoma, Norman, Oklahoma, USA
  • 6Institut de Recherche pour le Développement (IRD), UMR 228, ESPACE-DEV, Université de Guyane, Cayenne, Guyane, France

Correspondence: Frederik Kurzrock (frederik.kurzrock@reuniwatt.com)

Abstract
Back to toptop

Numerical weather prediction models tend to underestimate cloud presence and therefore often overestimate global horizontal irradiance (GHI). The assimilation of cloud water path (CWP) retrievals from geostationary satellites using an ensemble Kalman filter (EnKF) led to improved short-term GHI forecasts of the Weather Research and Forecasting (WRF) model in midlatitudes in case studies. An evaluation of the method under tropical conditions and a quantification of this improvement for study periods of more than a few days are still missing. This paper focuses on the assimilation of CWP retrievals in three phases (ice, supercooled, and liquid) in a 6-hourly cycling procedure and on the impact of this method on short-term forecasts of GHI for Réunion Island, a tropical island in the southwest Indian Ocean. The multilayer gridded cloud properties of NASA Langley's Satellite ClOud and Radiation Property retrieval System (SatCORPS) are assimilated using the EnKF of the Data Assimilation Research Testbed (DART) Manhattan release (revision 12002) and the advanced research WRF (ARW) v3.9.1.1. The ability of the method to improve cloud analyses and GHI forecasts is demonstrated, and a comparison using independent radiosoundings shows a reduction of specific humidity bias in the WRF analyses, especially in the low and middle troposphere. Ground-based GHI observations at 12 sites on Réunion Island are used to quantify the impact of CWP DA. Over a total of 44 d during austral summertime, when averaged over all sites, CWP data assimilation has a positive impact on GHI forecasts for all lead times between 5 and 14 h. Root mean square error and mean absolute error are reduced by 4 % and 3 %, respectively.

1 Introduction
Back to toptop

The ongoing global transition from conventional to renewable energy is accompanied by an expected increase in installed photovoltaic (PV) capacity (Schmela et al.2018). As an intermittent source of energy, PV requires solar irradiance forecasts in order to ensure grid stability and to enable an extensive feed-in of solar power into the electricity grids (Diagne et al.2013).

The high solar potential in the tropics promises high yields of PV power. At the same time, it is particularly challenging to forecast global horizontal irradiance (GHI) in these regions. One example is the French overseas territory of Réunion Island, which is located in the southwest Indian Ocean (SWIO) (Fig. 1). In this region, enhanced convection often causes large diurnal variability in solar irradiance (Badosa et al.2013). Additionally, homogeneous, unstable air masses make it difficult to forecast convective initiation, cloud generation, and cloud evolution. Consequently, solar irradiance forecast errors are especially pronounced in the austral summer season (December–February) when convection is strong compared to winter (Badosa et al.2015). Moreover, the specific topography of Réunion Island, with an elevation of up to 3069 m, results in an interplay of both breeze-induced clouds and orographic clouds due to the predominant southeasterly trade winds, which are often extremely unpredictable.

https://www.geosci-model-dev.net/12/3939/2019/gmd-12-3939-2019-f01

Figure 1Study region and WRF domain (red rectangle) in the southwest Indian Ocean.

Numerical weather prediction (NWP) models are appropriate to forecast clouds and solar irradiance for lead times of more than 6 h ahead (Sengupta et al.2017). Global circulation models (GCMs) currently provide weather information with an update frequency of four times per day, a temporal resolution of typically 1 h, and spatial resolutions of at least 10 km. In contrast, limited-area models (LAMs) can provide weather parameters at higher spatio-temporal resolution and with increased frequency, which fits better to the requirements of the PV industry. Another benefit of using LAMs for solar power forecasting is that the choice of the parameterisation schemes of such a model can be optimised for a certain geographical region, and the model can be adapted to specific local PV forecasting requirements (López-Coto et al.2013; Pérez et al.2014).

In general, NWP models tend to underestimate cloud cover, especially in the case of low clouds in coastal regions (Ruiz-Arias et al.2016; Yang and Kleissl2016; Haiden and Trentmann2015), and therefore they often overestimate surface solar irradiance. The accuracy of cloud cover forecasts is limited by the predictability of clouds, the skill of the NWP model and its parameterisation schemes, and the quality of the initial conditions. In the case of LAMs, initial conditions can either be derived directly by downscaling the GCM information or by applying data assimilation (DA) methods that statistically combine observations and background information such as previous forecasts (Kalnay2003).

In regions where conventional observations (e.g. synop stations, ships, radiosoundings, etc.) are rare, geostationary meteorological satellites provide valuable information that can be used for DA within LAMs. The assimilation of satellite-derived cloud information into LAMs can be categorised into either radiance or cloud property retrieval assimilation methods. Kurzrock et al. (2018) provide a review of geostationary meteorological satellite DA in LAMs and show that evaluations of the diverse methods that focus on cloud analyses under tropical conditions are rare in peer-reviewed literature. Moreover, many methods make use of additional observations such as ground-based observations or radiosoundings in order to optimise the DA performance. This is not feasible in regions where conventional observations are sparse, such as the SWIO.

In the case of radiance DA it is challenging to assimilate cloud-affected observations due to issues of nonlinearity and uncertainty linked with moist processes. As a result, cloud-affected measurements are often excluded by such methods. Cloud property DA methods, on the other hand, explicitly focus on retrievals in regions of cloud presence in order to directly influence and improve the cloud analyses. Several considerations from Kurzrock et al. (2018) inform the methodology applied in this study. Firstly, it is clear that the use of ensembles has become increasingly favoured, demonstrated by the growing number of hybrid DA methods. Secondly, the Weather Research and Forecasting (WRF) model (Skamarock et al.2008) is the most widely applied LAM regarding both radiance and cloud property assimilation in peer-reviewed literature. Thirdly, it was shown that although multilayer cloud property products from geostationary satellites do exist, they have been largely neglected so far by cloud property DA methods.

One example of such a product is the suite of cloud properties generated by NASA Langley’s Satellite ClOud and Radiation Property retrieval System (SatCORPS; Minnis et al.2016). The SatCORPS is used to provide both gridded and pixel-level cloud retrievals in near-real time and post facto from multiple geostationary and polar-orbiting satellites. In this study, gridded SatCORPS Meteosat-8 cloud properties are assimilated for the first time.

For the aforementioned reasons, among the existing cloud property assimilation methods, the method of Jones et al. (2013) has been identified as one of the most innovative and promising ones for short-term cloud cover forecasting. These authors develop a forward operator for cloud water path (CWP) retrievals for the Data Assimilation Research Testbed (DART) (Anderson et al.2009). CWP is the column-integrated amount of cloud water in the form of liquid or ice that is bound between a cloud-base pressure (CBP) and a cloud-top pressure (CTP). The forward operator integrates the model mixing ratios of water, ice, graupel, rain, and snow following the definition of Otkin (2010) to convert the column values of CWP into vertical distributions of water. The application of this forward operator in DART was shown to improve cloud forecasts in two case studies of severe weather events over the United States (Jones et al.2013, 2015).

Here we apply the CWP forward operator to SatCORPS gridded retrievals of three phases: liquid water path (LWP), supercooled water path (SWP), and ice water path (IWP). These retrievals are derived from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI) sensor aboard Meteosat-8.

This work is the first to evaluate the impact of geostationary satellite DA on (1) LAM cloud representation in the SWIO and (2) short-term GHI forecasts for Réunion Island using an innovative cloud property DA method. This contributes to an assessment and quantification of the impact of satellite-based cloud observation DA with LAMs in the tropics.

Section 2 introduces the methods and data used, and the results are presented in Sect. 3, which consists of an evaluation of the DA cycling, a case study to investigate the link between DA and free forecasts of GHI, and an analysis of solar irradiance forecasts for a total of 44 d. Conclusions are drawn in Sect. 4 along with an outlook for future work.

2 Methods and data
Back to toptop

2.1 Model and cycling configuration

In this study the LAM used is the WRF model in its Advanced Research WRF (ARW) version 3.9.1.1. A single WRF domain is applied over a part of the southwest Indian Ocean including Réunion Island and Mauritius in its centre (Fig. 1). A horizontal grid spacing of 12 km and 61 vertical levels stretching from the surface up to 50 hPa are used. We chose not to perform convection-permitting simulations or nesting as our own investigations over Réunion Island, and studies of other regions (Lara-Fanego et al.2012; Zhou et al.2018), have shown that increasing the WRF grid spacing does not necessarily improve the performance of irradiance forecasts. A potential reason for this is that nonlinearity increases with increasing model grid spacing (Mass et al.2002; Hohenegger and Schär2007). Moreover, DA with a two-way nested domain is considerably more complex since the updated analyses of the nested domains must be physically consistent with those of the parent domains.

The Global Ensemble Forecast System (GEFS), which has a grid spacing of 0.5, 27 vertical levels, and a temporal resolution of 3 h, consists of 21 ensemble members and provides WRF with boundary conditions (BCs) and initial conditions (ICs). In line with previous DA studies with LAMs, which use around 40 members (Schraff et al.2016; Pan et al.2014; Dillon et al.2016), an ensemble consisting of 41 WRF members is applied in this study. The BCs and ICs of members 1–20 of the WRF ensemble are generated from the original 20 GEFS members. In order to obtain 40 members using GEFS, the BCs and ICs of members 1–20 are perturbed with the WRF Data Assimilation (WRFDA; Barker et al.2012) system using the standard NCEP background error covariance to generate WRF members 21–40. The Global Forecast System (GFS) with a grid spacing of 0.25, 32 vertical levels, and a temporal resolution of 1 h is used for the BCs and ICs of the 41st WRF member. Initial conditions for all members are only generated from GEFS and GFS at the start of the DA cycling after which they are fed in from the previous cycling step.

All members use the same model configuration; this includes the Thompson microphysics scheme (Thompson et al.2008), the Dudhia scheme for shortwave radiation (Dudhia1989), and the Kain–Fritsch scheme (Kain2004) for cumulus parameterisation. These schemes are among the most commonly used in WRF configurations according to a WRF physics survey (UCAR2015), and this configuration also performed well for Réunion Island in preceding experiments (not shown).

Due to the higher spatio-temporal resolution of the BCs of the GFS member, after each DA step the first 40 members of the ensemble are recentred on the GFS member (member 41). The ensemble mean is subtracted from each member to obtain the perturbations from the mean for each member. These perturbations are then individually added to the 41st member to regenerate the 40-member ensemble, which now has member 41 as its mean.

The DA cycling interval is 6 h, leading to four cycle steps per day; i.e. DA is performed at 00:00, 06:00, 12:00, and 18:00 UTC, leading to new analyses (also referred to as “posteriors”) at these times from which first-guess forecasts (also referred to as “priors”) for a lead time of 6 h are performed. As satellite observations are available more frequently than every 6 h it is possible to reduce this interval to provide updated analyses for free forecasts (FFs) at a higher update rate than 6 h. For reasons of simplicity, this study uses 6-hourly cycling.

Since member 41 uses the BCs with the highest spatio-temporal resolution this member is chosen for free forecasts that are realised every 24 h at 00:00 UTC (04:00 local time) using its updated analyses (ICs) from the DA cycling. The BCs for the free forecasts are likewise provided by GFS and are generated for lead times up to 16 h.

Two cycling and free forecast experiments were performed: a cycling experiment with CWP DA (CWPDA) and a control cycling experiment without DA wherein all observations are only evaluated by DART but not assimilated (CTRL). The respective free forecast experiments that are run using the 00:00 UTC analyses of the two cycling experiments are labelled CWPDA-FF and CTRL-FF.

The experiments of this study are performed for the austral summer of 2017 and 2018, i.e. between 9 December 2017 and 1 March 2018. Some periods are excluded in the simulations due to gaps in CWP data availability and cyclonic activity. Therefore, cycling is performed for several smaller periods, listed in Table 1). The convective activity is generally pronounced during these periods and in each case at least two DA steps were performed before using a 00:00 UTC analysis for the free forecast periods listed in Table 1.

Table 1Overview of the cycling experiment periods and the associated free forecast experiment and dates.

Download Print Version | Download XLSX

2.2 CWP assimilation methodology

The DA cycling is performed using the DART and its ensemble adjustment Kalman filter (Anderson2001), and the CWP forward operator developed by Jones et al. (2013) is used to assimilate CWP observations. Jones et al. (2015) describe a few updates to the forward operator, which is close to the version used in this study.

In comparison to other cloud property assimilation methods that do not take into account multilevel cloud information, one strength of this forward operator is that it accounts for cases when the model and CWP observations contain clouds that are localised at different altitudes. The forward operator does this through adjustments to the modelled CWP. For example, if the model contains a low-level cloud and the observations indicate high-level cirrus, the integrated CWP value might be similar and the impact to the model analysis would be small if the cloud altitude was not considered. In this case the forward operator constrains the model CWP to the level of the observed cloud, leading to a larger impact in the analysis, and a cloud is introduced at the correct vertical location.

The SatCORPS cloud products are retrieved using algorithms originally developed to analyse the MODerate-resolution Imaging Spectroradiometer (MODIS) aboard Terra and Aqua for the NASA Clouds and the Earth's Radiant Energy System (CERES) project (Minnis et al.2011; Trepte et al.2019). These algorithms have been adapted to other imagers aboard geostationary (Minnis et al.2008) and other low-Earth-orbit satellites (Minnis et al.2016). Among other parameters, the SatCORPS data set includes both a pixel and a gridded CWP product.

Depending on the cloud-top phase, as determined from cloud-top temperature (CTT), a given pixel is defined as ice, supercooled liquid, or liquid under the assumption that the cloud phase and particle size are vertically homogenous. The actual CWP is derived as a function of total optical depth and particle size retrievals. At night, the retrievals of cloud optical depth are not as accurate as during daytime due to the lack of visible data.

The global gridded data have a grid spacing of 0.25 (approximately 28 km) latitudinally and 0.3125 (approximately 34 km) longitudinally and are independent of the respective satellite sensor resolution (i.e. the resolution of the pixel product). The data are available at hourly resolution. For this study, the retrievals of Meteosat-8 are used. The satellite has been operational over the Indian Ocean since February 2017 and has a sub-satellite position of 41.5 E.

SatCORPS provides water path (WP) retrievals in three phases: liquid water path (LWP), supercooled water path (SWP), and ice water path (IWP). The supercooled phase is determined using a post-retrieval classification. If the pixel phase is liquid and has a CTT below 273.15 K the pixel phase is defined as supercooled liquid. The retrievals of the different phases are assimilated as independent observations using the same forward operator, which can be considered multilayer cloud property assimilation.

Each of the three-phased WP retrievals are bound between a cloud-base pressure (CBP) and a cloud-top pressure (CTP) that are also included in the SatCORPS product. The forward operator requires information about the cloud effective pressure (CEP) for vertical localisation. Following Jones et al. (2015) we set this to be the mean of CTP and CBP.

As this is the first time that SatCORPS gridded Meteosat-8 retrievals are assimilated, a horizontal localisation radius has to be defined for these observations. The Gaspari–Cohn covariance cutoff method is used for horizontal localisation (Gaspari and Cohn1999). In this study, the half-width of the localisation radius (also called cutoff) is set to 90 km, a value that performed well in sensitivity runs (not shown). Consequently, there is a factor of 3 difference between observation grid spacing (approximately 30 km) and cutoff. This factor corresponds approximately to the factor of 3.3 applied by Jones et al. (2015), who use a cutoff of 20 km for satellite observations at 4 km nominal resolution.

While in radiance assimilation the historical approach is to assimilate only clear-sky observations, avoid cloud-affected observations, and gradually move towards all-sky assimilation (Kurzrock et al.2018), an opposite strategy is followed in this work on cloud property assimilation. No clear-sky retrievals are assimilated in the experiments in this study. Test experiments showed that the assimilation of clear-sky retrievals led to a strong reduction in the amount of cloud in WRF simulations with the current experimental setup. This means that defining a minimum threshold for “cloudy” WP retrievals allows the EnKF to predominantly assimilate observations over cloudy locations. To address cases when WRF tends to underestimate cloud presence we use a minimum threshold of 0.04 kg m−2 to define cloudy observations of all phases.

We apply the same retrieval errors as Jones et al. (2013, 2015) (Table 2). These were defined for pixel data of the SatCORPS product over the US for both IWP and LWP derived from the Geostationary Operational Environmental Satellite (GOES). There has yet to be a study assessing the errors of the gridded product for Meteosat-8-based retrievals. Therefore, these errors serve as a first estimate for our study. The true uncertainty in CWP varies with cloud conditions, solar and viewing geometry, and other factors which need to be assessed more thoroughly. Defining more region-specific errors as well as independent errors for each phase may be an objective of future work.

Spatially varying state-space adaptive covariance inflation is applied to the first guess at each cycling step (Anderson2009, 2007). This is a commonly used method to increase prior ensemble spread and prevent the ensemble from collapsing to a single solution.

Table 2Assigned WP retrieval errors depending on threshold values.

Download Print Version | Download XLSX

2.3 DA evaluation using radiosoundings

Independent observations are used to evaluate the DA method in addition to the assimilated observations. The WRF domain in this study contains one radiosonde station at Gillot-Aéroport (Fig. 2) where radiosondes are launched daily at 12:00 UTC. These soundings provide valuable independent in situ observations that are used for observation space diagnostics. The soundings are available via the National Center for Environmental Prediction (NCEP) Global Data Assimilation System (GDAS) data set and are evaluated within DART.

https://www.geosci-model-dev.net/12/3939/2019/gmd-12-3939-2019-f02

Figure 2Topography of Réunion Island (21 S, 55.5 E) and the locations of the 12 Météo-France pyranometers used for the evaluation of the WRF solar irradiance forecasts.

2.4 Solar irradiance forecast verification

An evaluation of the GHI forecasts produced is performed using pyranometer observations provided by Météo-France from 12 locations spread across Réunion Island (Fig. 2) at various altitudes between 5 m (Pointe des Trois-Bassins) and 2149 m (Piton–Maido). The raw observations have a temporal resolution of 6 min, and a linear interpolation to 15 min is performed to match the WRF output.

The quality control measures for GHI observations consist of a visual verification and the application of the sub-hourly data quality control procedures proposed by Espinar et al. (2012) that detect extrema, rare observations, and maximum steps for two following measures.

It is common to perform spatial averaging of WRF solar irradiance output around the site of interest rather than using only the GHI forecasted for the closest grid box (Verbois et al.2018; Lara-Fanego et al.2012; Zhou et al.2018). This reduces the variability of the forecasted GHI and thus typically reduces forecast errors in terms of the standard metrics, root mean square error (RMSE), and mean absolute error (MAE). For each GHI forecast at a given location and lead time we apply inverse distance weighting (IDW) (Shepard1968) according to the formula

(1)GHI(bc)^=i=1nGHI(bi)di-1i=1ndi-1,

where di is the distance between the grid box containing the observation site, bc, and another grid box, bi. The best results were seen when bi was considered within a 75 km radius of the observation site. Besides IDW, no further post-processing is applied to the WRF solar irradiance forecasts.

Aerosol optical thickness in the study region rarely exceeds 0.2 (Stöckli2018), leading to a stable clear-sky irradiance on Réunion Island compared to other regions of the world where aerosol optical thickness is highly variable. Moreover, the influence of volcanic aerosols on solar irradiance can be neglected as there were no volcanic eruptions on Réunion Island during the overall study period. We therefore assume that fluctuations between forecasted and observed GHI caused by aerosols are negligible compared to the influence of clouds.

The clear-sky model of the European Solar Radiation Atlas (ESRA) (Rigollier et al.2000) is used for clear-sky normalisation of solar irradiance forecasts.

2.5 Validation metrics

Various metrics are considered to evaluate the performance of WRF outputs compared to CWP retrievals, radiosoundings, and GHI observations. For n predictions, y, of the observation (y can be either a prior or posterior) and the observations, o, these metrics are defined as follows. The RMSE is defined as

(2)RMSE=1ni=1n(yi-oi)2.

The MAE is defined as

(3)MAE=1ni=1n|yi-oi|.

MAE becomes the mean bias error (MBE or simply bias) if the absolute of yioi is not taken in Eq. (3).

The correlation (or Pearson correlation coefficient) is defined as

(4)corry,o=cov(y,o)σyσo,

with “cov” being the covariance and σ being the standard deviation.

The total spread (TSPRD) is defined as the pooled spread of the ensemble and observation errors:

(5)TSPRD=σy+σo2,

with σo being the standard deviation of the observation error and σy being the spread of the 41-member ensemble, which is defined as

(6)σY=141m=141(Ym-Y)2,

where Y is the ensemble mean.

3 Results
Back to toptop

3.1 Cycling evaluation

This subsection evaluates the implementation of the CWP DA methodology.

As a first step, the RMSE for WP at different altitudes during all cycling periods listed in Table 1 is calculated and shown in Fig. 3 in which the impact of the three-phased CWP assimilation can be seen. For each phase and altitude, the majority of the available observations (green circles) are assimilated (green asterisks), which indicates that the DART quality check only excludes a reasonable amount of observations and that the defined WP errors (Table 2) are realistic. Depending on the mean CEP of the different phases, the maximum number of WP observations, approximately 20 000 per phase, are localised around certain pressure-level bins. These bins are 400 hPa for IWP, 500 hPa for SWP, and 850 hPa for LWP.

https://www.geosci-model-dev.net/12/3939/2019/gmd-12-3939-2019-f03

Figure 3Vertical profiles of the RMSE per bins of CEP for the three phases IWP (a), SWP (b), and LWP (c) for the ensemble mean first guess (solid lines) and analysis (dashed lines) as a mean over all periods listed in Table 1. The number of possible (circles) and assimilated (asterisks) observations is shown in green.

Download

The difference between the first guesses (solid lines) and the analyses (dashed lines) is a measure of the impact of the respective phase on the analysis, and it can be seen that IWP has the greatest impact and LWP has the lowest impact. This is to be expected since IWP usually exhibits the largest absolute values of WP. This difference in absolute values also affects the RMSE, which at 400 hPa is highest for IWP with averages of 0.43 and 0.13 kg m−2 in the first guesses and analyses, respectively. In comparison, the RMSE for LWP at 850 hPa is reduced from 0.09 kg m−2 in the first guesses to 0.08 kg m−2 in the analyses.

The evolution of RMSE, MBE, and TSPRD for the ensemble mean first guess and analysis is shown in Fig. 4. Cycling period C (Table 1) is chosen as an example and the pressure levels identified above are chosen for the respective phase.

https://www.geosci-model-dev.net/12/3939/2019/gmd-12-3939-2019-f04

Figure 4Temporal evolution of ensemble mean first guess and analysis for the three phases IWP at 400 hPa (a), SWP at 500 hPa, (b) and LWP at 850 hPa (c) for cycling period C (Table 1). The RMSE (rectangles and solid lines), MBE (triangles and dashed lines), and TSPRD (pluses and dotted lines) are shown. The sawtooth pattern observed is a common feature of such plots in DA. The number of assimilated observations per assimilation time is represented by the green dots.

Download

The classical sawtooth pattern caused by the differences between the first guess and analysis is most clearly visible for IWP. This indicates that the retrievals of this phase have the most impact in the filter. While a reduction of RMSE between the first guess and analysis is visible at most assimilation times for SWP, this is not the case for LWP. In fact, the smallest impact is achieved for LWP, which is in line with the findings shown in Fig. 3.

TSPRD and RMSE are roughly in phase for IWP; the values generally increase to around 0.3 kg m−2 for IWP in the 6 h first-guess forecasts. Relatively high RMSE values of more than 0.6 kg m−2 are reached twice for IWP during this period, but these are linked to exceptionally large biases in both cases. In the analyses RMSE and TSPRD are mostly around 0.1 kg m−2.

RMSE and TSPRD are less in phase for SWP, which is in line with the expected lower impact of this phase. For LWP, TSPRD never assumes values lower than 0.05 kg m−2, which is the defined observation error for the lowest WP observations (Table 2). This underlines once more the importance of determining phase-dependent errors that should ideally be less than 0.05 kg m−2 for low LWP retrievals. As can be seen in Fig. 4, a clear difference between the first guess and analysis becomes visible only at times when TSPRD is larger than 0.05 kg m−2. Thus, the relatively large observation error for the smallest observations is likely the reason for the comparably small impact of LWP.

The number of assimilated observations may be very different than the number of available observations due to quality control within DART, as can be seen in Fig. 3. The example of SWP in Fig. 4 shows that the number of assimilated observations is not necessarily correlated with an improvement in terms of RMSE. For example, on 12 January the number of assimilated observations fluctuates between 80 and 300, but the RMSE remains relatively stable. For all three phases, the number of assimilated observations per assimilation time varies heavily from zero to a few hundred observations depending on the time of day.

The MBE for IWP fluctuates around zero with a positive correction in each analysis. For SWP and LWP there is a continuously negative MBE, mostly between −0.1 and −0.05kg m−2. This indicates that WRF underestimates clouds in the middle and lower troposphere. DA corrects for MBE for all three phases but is far from achieving MBEs close to zero for SWP and LWP.

Figures 3 and 4 show evaluations of DA experiments compared to the assimilated observations and therefore demonstrate the ability of the DA cycling to constrain the WRF simulations. Although this can be used to assess the performance of the assimilation itself, this cannot act as an exhaustive validation as no independent observations are used.

Consequently, an evaluation of the MBE for temperature and specific humidity using independent radiosonde measurements is shown in Fig. 5. All 43 radiosoundings at Gillot-Aéroport during the complete study period (Table 1) are considered. The total number of evaluated observations per pressure bin are shown in green and reach up to 80 at around 400 hPa. The lack of radiosonde stations in the model domain and the fact that only one station in the centre of the domain is considered are compensated for, to some extent, by the duration of the study period that includes various cloud and weather situations.

https://www.geosci-model-dev.net/12/3939/2019/gmd-12-3939-2019-f05

Figure 5Vertical profiles of the MBE per bins of pressure for specific humidity (a) and temperature (b) for the two experiments CWPDA (black) and CTRL (orange), with respect to independent radiosonde observations. The solid lines show the ensemble mean first guesses. The dashed line shows the analyses of CWPDA. A dashed line does not exist for CTRL since prior and posterior are identical. The number of evaluated observations per pressure bin is shown in green. All cycling periods listed in Table 1, including 43 radiosoundings at 12:00 UTC at Gillot-Aéroport, are considered.

Download

The ensemble mean first guess (solid lines) and analysis (dashed line) are shown for both experiments CTRL (orange line) and CWPDA (black lines), with the first guess and analysis being the same for CTRL as no DA is performed. For both experiments an overall negative MBE for specific humidity and a positive MBE for temperature are visible throughout the troposphere. The fact that the MBE for specific humidity is largest in the lower troposphere, with more than 1 g kg−1, confirms that WRF tends to underestimate low clouds. At the same time, the difference between the two experiments for specific humidity is the largest in the lower troposphere around 850 hPa. This shows that the assimilation corrects for the lack of humidity in the analyses to some extent and thus has the effect of a bias correction.

Although Figs. 3 and 4 indicate that the largest impact of the DA is in the higher troposphere from IWP observations, the effect on bias regarding radiosonde specific humidity is smaller at these altitudes than in the low troposphere. This may be explained by the fact that absolute values of specific humidity are generally largest in the low troposphere. Moreover, the evaluated radio soundings are valid only for the centre of the domain, while Figs. 3 and 4 include information about the whole model domain. Furthermore, local thermal circulations likely cause more low clouds at this coastal location than in the rest of the domain, which lacks other landmasses.

The difference between CWPDA prior and posterior is more distinct for specific humidity than for temperature, leading to an improvement of humidity bias in the analyses compared to the first guesses. As the objective here is to improve cloud prediction, the improvement in humidity, a field strongly related to cloud, is more significant than an improvement in temperature. It is, however, favourable that the CWP DA does not have a negative impact on the temperature profile.

Regarding the DA configuration, a number of parameters such as the covariance localisation radius are known to largely impact the DA outcome (Otkin2012; Ying et al.2018). Concerning the gridded multiphase SatCORPS retrievals used in this study, the sensitivity of the assimilation to the localisation radius might be assessed in detail in future work. This is especially true for experiments at convective-scale resolutions that have yet to be performed.

Moreover, the ensemble spread could be modulated in various ways by adjusting the WRF ensemble generation method. For example, multiple sets of physics options could be applied in the ensemble members, an optimal compromise between ensemble size and spread could be determined, the method for WRF ensemble member generation from the 21-member GEFS ensemble ICs and BCs might be optimised, and different settings for adaptive inflation could be tested. The WRF ensemble may also be applied to the free forecasts for probabilistic solar irradiance forecasting.

In summary, the operational correctness of the DA methodology is confirmed. The largest impact is found for the ice-phase retrievals and the lowest impact for the liquid-phase retrievals. Independent radiosoundings indicate a humidity bias reduction between first guesses and analyses. Any improvement of the utilised cloud products is expected to positively influence the DA outcome. Future cloud products are aiming to better account for vertical heterogeneity and thus produce multiphase CWP estimates that are closer to reality and more similar to what NWP models produce regarding deep overlapping cloud systems. Moreover, a precise definition of phase-dependent errors for the SatCORPS Meteosat-8 products does not yet exist. Once this information is obtained, the performance of the applied system using these observation errors can be assessed.

3.2 Case study evaluation

Having demonstrated the correct implementation of the DA methodology, which shows a generally positive impact on the cloud analyses, this subsection focuses on a case study of one particular day. The influence of the applied DA strategy on the cloud analysis and the subsequent free forecast with respect to solar irradiance is analysed.

On 12 January 2018 the large-scale flow in the study region was governed by an anticyclone south of Madagascar and two depressions located at the northern boundary of the WRF domain as indicated by synoptic surface analyses published by Météo-France and the South African Weather Service (not shown). The first depression was located approximately 700 km north of Réunion Island and the second approximately 1500 km northeast of Réunion Island. This situation led to a northwesterly flow throughout the model domain and the creation of a convergence zone extending diagonally across the model domain from the northwest to the southeast.

Such large convective cloud systems associated with low-pressure systems north of Réunion Island typically produce the lowest GHI values during austral summer (Badosa et al.2015). Hence, the day considered here has one of the lowest observed GHI values throughout the combined study period listed in Table 1 and therefore most distinctly shows the impact of the DA on the GHI forecast.

Figure 6a, c, and e show SatCORPS WP retrievals at the time of the analysis (00:00 UTC) of the free forecasts performed for this day. The clouds induced by the convergence zone are visible, especially in the ice and liquid phase, with WP values exceeding 0.3 kg m−2 in some areas. The highest values in the vicinity of Réunion Island can be observed in the ice phase, indicating high clouds. These ice clouds persist during the day (not shown) and contribute largely to the observed low solar irradiance on Réunion Island throughout the day.

https://www.geosci-model-dev.net/12/3939/2019/gmd-12-3939-2019-f06

Figure 6Maps of SatCORPS Meteosat-8 gridded CWP retrievals for the three phases IWP (a), SWP (c), and LWP (e), and the difference of the posterior ensemble mean between the two cycling experiments (CWPDA minus CTRL) for the three phases, i.e. IWPdiff (b), SWPdiff (d), and LWPdiff (f). Missing observations are shown in grey. Red indicates that CWPDA generates higher WP values than CTRL, and blue indicates that CWPDA generates lower values than CTRL. Only locations where the retrievals were successfully assimilated in CWPDA are shown in the plots. All plots show 12 January 2018, 00:00 UTC.

Figure 6b, d, and f show observation space diagnostics of the WP difference in each phase between the two experiments (CWPDA minus CTRL) in terms of the posterior ensemble mean WP. More cloud water is present in all phases over the convergence zone in CWPDA when compared with the CTRL experiment. In the ice phase, distinct gradients between areas of increased and decreased WP are visible that indicate corrections to the cloud location resulting from the DA. Maximum and minimum values are −0.9 and 1.9 kg m−2 for IWP (b), −0.2 and 0.19 kg m−2 for SWP (d), and −0.06 and 0.19 kg m−2 for LWP (f).

The effect of these corrections on the free forecast experiment in terms of cloud fraction is shown in Fig. 7. The ice clouds induced by the convergence zone are visible in both CTRL-FF and CWPDA-FF, and in both cases clouds are located above Réunion Island 15 min after the analysis time (a and b). A northeastward relocation of the clouds around Réunion Island is visible for CWPDA-FF. As the clouds move eastward over the course of the day, this has the effect of causing high clouds to persist over Réunion Island in CWPDA-FF (d and f), while clouds are further west in CTRL-FF (c and e), leaving the model levels around 300 hPa cloud-free above Réunion at 08:00 UTC (corresponding to noon local time). In CWPDA-FF, clouds are still present at 300 hPa over Réunion Island at 08:00 UTC, leading to more realistic forecasts of solar irradiance when compared with ground observations as shown in the following.

https://www.geosci-model-dev.net/12/3939/2019/gmd-12-3939-2019-f07

Figure 7WRF forecasts of cloud fraction at 300 hPa from the CTRL-FF (a, c, e) and CWPDA-FF (b, d, f) experiments on 12 January 2018 at 00:15 UTC (a, b), 04:00 UTC (c, d), and 08:00 UTC (e, f). The initial conditions originate from the experiments CTRL and CWPDA, respectively. Coastal lines are shown in red.

A large variability of GHI is observed during the day for all pyranometer sites as well as between the different sites (Fig. 8). GHI values are overall low and mostly below 400 W m−2 at all sites; this is mainly caused by the high clouds during that day as determined from satellite images. A distinct difference is visible between CTRL-FF and CWPDA-FF as a consequence of the DA. Although the forecasted GHI is largely reduced in CWPDA-FF, the values around noon are still too high compared to the observations for most sites. Further improvements might be found by analysing the interplay between DA, post-processing, and the configuration of WRF in terms of grid spacing, nesting, and the choice of parameterisation schemes. In this study we focus on the influence of DA only, which is clearly visible in this example.

https://www.geosci-model-dev.net/12/3939/2019/gmd-12-3939-2019-f08

Figure 8GHI on Réunion Island on 12 January 2018 as observed (blue) and forecasted by CWPDA-FF (orange) and CTRL-FF (green) with IDW post-processing for the sites Plaine des Cafres (a), Gros Piton Sainte-Rose (b), Cilaos (c), Bellevue Bras-Panon (d), Le Port (e), Colimaçons (f), Piton–Maido (g), Pointe des Trois-Bassins (h), Petite-France (i), Pierrefonds-Aéroport (j), Le Baril (k), and Gillot-Aéroport (l).

Download

This comparison between forecasts and observations of GHI also illustrates the difficulty of forecasting ramp events. The chosen grid spacing of 12 km and IDW post-processing results in a smoothing of ramps in the WRF forecasts, which is why the widely used metrics RMSE and MAE are suitable for a quantification of the DA impact. If one wants to study the impact of DA on ramp forecasts specifically, experiments at convection-resolving resolutions, a focus on parameterisation schemes, and specific ramp metrics and post-processing methods are required.

3.3 Free forecast evaluation

The previous subsection illustrates that cloud property DA can have a considerable positive impact on short-term forecasts of cloud-related parameters such as CWP, specific humidity, and solar irradiance in the SWIO. Nevertheless, as in many other proofs of concept for DA methods, only one weather situation has been considered so far in terms of solar irradiance. An evaluation over a period of more than a few days is rare in peer-reviewed literature (Kurzrock et al.2018). Therefore, an evaluation of the free forecasts for a total of 44 d (Table 1) is performed in this subsection in order to quantify the impact of DA on GHI forecasts more meaningfully.

Figure 9 shows an evaluation of GHI forecasts from CTRL-FF and CWPDA-FF for the 12 considered sites at Réunion Island. The spread between the sites for all metrics can be explained by the location of the sites and the local meteorological conditions. The six sites with the best performance in terms of RMSE (between 230 and 280 W m−2) and MAE (between 180 and 220 W m−2) are Gillot-Aéroport, Pierrefonds-Aéroport, Pointe des Trois-Bassins, Piton Sainte-Rose, Le Port, and Le Baril. All of these sites are located on the coastline of Réunion (Fig. 2) where the influence of clouds that are induced by orographic uplift and thermal circulations caused by the mountains is lowest.

https://www.geosci-model-dev.net/12/3939/2019/gmd-12-3939-2019-f09

Figure 9WRF intraday irradiance forecast performance at each site in terms of RMSE (a), MAE (b), MBE (c), and correlation (d). The difference between the experiments CWPDA-FF and CTRL-FF is shown, and IDW has been applied to the GHI forecasts. The free forecasts cover a total of 44 d between 10 December 2017 and 1 March 2018 as listed in Table 1.

Download

The two sites with the worst results in terms of RMSE, MAE, and correlation are Colimaçons and Petite-France. These sites are both located in the west of the island at 800 and 1200 m, respectively, meaning these sites are typically in the lee of the trade winds at altitudes at which thermally driven convective clouds often form. This leads to lower GHI values (Badosa et al.2013) and produces the most complex solar irradiance conditions (Bessafi et al.2018) compared to the other sites. This explains the high positive MBE for these two sites.

A positive bias can be seen for most sites, which confirms that WRF tends to overestimate GHI on Réunion Island during summertime with pronounced convective activity. There is a shift to lower values of MBE between CTRL-FF and CWPDA-FF with approximately the same amplitude for all sites. This illustrates that CWPDA-FF generally includes more clouds than CTRL-FF, but it also means that for sites with a negative MBE, typically the ones that are not located in the mountains, there is a degradation towards more negative values of MBE.

An improvement of GHI forecasts between CTRL-FF and CWPDA-FF is visible for almost all sites in terms of RMSE, MAE, and correlation. On average across all sites, RMSE improves by 11 W m−2 (4 %), MAE by 6 W m−2 (3 %), and correlation by 0.03. The only exception to this is the site at Le Port where the RMSE is degraded by 1 W m−2 and MAE by 2 W m−2. In terms of RMSE and MAE, there is less improvement at sites for which GHI is predicted most accurately (Gillot-Aéroport and Pierrefonds-Aéroport). This may be explained in the same way as the large improvement at the sites with the least accuracy: as found above, DA leads to both a better representation of cloud location and generally increased lower tropospheric moisture. Both of these effects have an impact on the sites with the least accuracy. Being located far from mountain slopes, thermally induced convective clouds are rarer at Gillot-Aéroport and Pierrefonds-Aéroport. The effect of low-level clouds at the mountain slopes is thus of less consequence here compared to improved large-scale cloud system locations.

Figure 9 shows the averaged intraday values for each evaluation metric over all forecasted lead times. The RMSE per lead time as a mean over all sites is shown in Fig. 10 in order to evaluate the impact of the applied DA method on the free forecast of GHI with respect to lead time.

https://www.geosci-model-dev.net/12/3939/2019/gmd-12-3939-2019-f10

Figure 10Absolute (a) and clear-sky normalised (b) RMSE of the WRF irradiance forecasts per lead time as a mean over the 12 considered sites on Réunion Island for all free forecast dates listed in Table 1 (44 in total). Values for the two experiments CWPDA-FF (black) and CTRL-FF (orange) are shown. The number of considered days per lead time (green crosses) varies since a given lead time of a given day is considered only when observations are available for all 12 sites. Local time is UTC−4.

Download

GHI observations are not always available for all 12 sites for a given lead time and day, which complicates comparisons of different lead times. Consequently, the number of considered days per lead time shown in the figure is the number of days for which observations are available for all 12 sites. These are the days that have been considered in the calculation of RMSE for a given lead time. The first lead time is no earlier than 5 h (05:00 UTC or 09:00 am local time) since the observations in the morning did not pass the quality control for several stations, which is often due to shadowing, mainly caused by the mountains.

The free forecasts that have been initialised with CWPDA have a lower RMSE than CTRL-FF throughout the day. Both the absolute (a) and the clear-sky normalised RMSE (b) are shown in Fig. 10. The representation of absolute RMSE does not correct for the diurnal cycle of GHI, which leads to the characteristic curve. It does, however, allow for the identification of the absolute difference in RMSE between CTRL-FF and CWPDA-FF that reaches up to 60 W m−2 at 08:00 UTC (noon local time).

The normalisation with the clear-sky irradiance removes the diurnal cycle, showing an expected increasing forecast error with increasing lead time for both experiments. The maximum absolute difference of 60 W m−2 between CTRL-FF and CWPDA-FF translates to approximately 2 % of normalised RMSE (Fig. 10b).

With increasing lead time, the predictability of cloud evolution decreases and the influence of the boundary conditions is expected to become larger compared to that of the initial conditions. This means that the differences between CTRL-FF and CWPDA-FF are expected to be larger for short lead times than for longer ones, indicating that most of the DA impact occurs close to the analysis time. According to Fig. 10 this is not the case in the present experiments; rather, in the first 14 h of free forecast the difference between CTRL-FF and CWPDA-FF does not change remarkably except for the first two lead times (04:45 and 05:00 UTC), for which RMSE is almost identical.

Together with the above findings this indicates that the DA of CWP generally adds more clouds to WRF, reduces the overestimation of GHI, and therefore acts like a sophisticated bias correction. On average, the additional clouds do not vanish within the first 14 h of forecast, leading to improved GHI forecasts throughout the day.

4 Conclusions
Back to toptop

Previous studies have shown that the assimilation of geostationary CWP retrievals with WRF-DART leads to improved short-term GHI forecasts. However, this improvement has never been quantified for study periods of more than a few days. Moreover, the performance under tropical conditions has been unknown so far. Herein, the successful assimilation of multiphase geostationary CWP retrievals with a 41-member WRF ensemble over the SWIO is demonstrated for a total of 44 d in austral summer and the impact on short-term GHI forecasts for Réunion Island is quantified.

Gridded Meteosat-8 retrievals of liquid, supercooled liquid, and ice water path from NASA Langley's SatCORPS are assimilated in a 6-hourly cycling procedure. Free forecasts using initial conditions from the cycling are produced once per day starting at 00:00 UTC. Control experiments without DA are performed for both the cycling and free forecasts, enabling an evaluation of the impact of the applied DA methodology.

It is demonstrated that the assimilated retrievals of IWP, SWP, and LWP have the most impact at pressure levels of 400, 500, and 850 hPa, respectively. The largest contribution comes from the IWP retrievals with an average reduction in RMSE of approximately 0.2 kg m−2 between the first guess and analysis. LWP has the lowest impact, which can partly be explained by the large observation errors for small observations.

The evaluation using 43 independent radiosoundings shows a reduced bias in specific humidity for the experiment with CWP DA, especially in the mid-troposphere. A further reduction of bias between the first guesses and analyses supports the case that the applied DA method leads to more realistic WRF humidity profiles and consequently improves the “cloud analyses”.

Although this DA methodology has yet to be fully optimised, the positive impact on short-term solar irradiance forecasts demonstrated in this paper is clear. The comparison between inverse-distance-weighted WRF forecasts and ground-based observations of GHI at 12 sites on Réunion Island allows for a quantification of the DA impact. The study period in austral summer 2017–2018 includes complex irradiance conditions and enhanced convection compared to wintertime. Two major effects of the applied method can be deduced. Firstly, the location of large-scale cloud systems is corrected, and secondly, the increased amount of lower tropospheric water in WRF leads to more breeze-induced convection on the slopes of the island.

The evaluation of GHI forecasts from the experiments with and without DA shows an overall reduction of 4 % for RMSE and 3 % for MAE due to CWP DA on average over all sites. The method of refining the ICs using CWP DA causes a positive impact on GHI forecasts for the whole duration of the forecast, i.e. up to a lead time of 14 h. As a consequence of the complex topography of Réunion Island and local thermal circulations, the highest forecast error reduction is achieved for sites located in the mountains and in the lee of the trade winds. Future experiments at higher model resolutions should take this circumstance into account and evaluate the link between the impact of satellite data assimilation and the model’s capability to resolve thermally induced local clouds.

There is potential for improvement of the applied methodology, mainly regarding the DA configuration and CWP retrieval errors. As more geostationary satellites of the third generation become operational, the resolution of such observations increases and global gridded cloud products may be of higher resolution in the future. This would open new possibilities for multilayer cloud information to be assimilated in a similar manner as presented here.

This work is a contribution to improved short-term solar irradiance forecasts in complex tropical environments. The obtained results allow us to produce more accurate solar power forecasts and may have positive impacts on other applications that depend on accurate information about cloudiness. As the cloud products used here are available globally, the method offers a portable and globally applicable approach.

Code and data availability
Back to toptop
Code and data availability. 

The WRF-ARW source code is publicly available at http://www2.mmm.ucar.edu/wrf/users/ (last access: 4 September 2019). Version 3.9.1.1 of WRF-ARW (released on 28 August 2017) is used for this work. The DART source code (Anderson et al.2009) including the CWP forward operator (Jones et al.2013) is publicly available at https://www.image.ucar.edu/DAReS/DART/ (last access: 4 September 2019). The Manhattan version of DART (release 12002) is used for this work. The WRF-ARW and DART namelists used in the experiments are available here: https://doi.org/10.5281/zenodo.3354949 (Kurzrock2019). The WRF configuration for the cycling and the free forecast experiments is identical. The SatCORPS Meteosat-8 retrievals (Minnis et al.2016) are available in near-real time at https://cloudsway2.larc.nasa.gov/ (last access: 4 September 2019). GFS and GEFS data are available at ftp://ftp.ncep.noaa.gov/data/nccf/com/gfs/prod/ (last access: 4 September 2019) and ftp://ftp.ncep.noaa.gov/data/nccf/com/gens/prod/ (last access: 4 September 2019), respectively. The radiosoundings are contained in GDAS data available at https://nomads.ncdc.noaa.gov/data/gdas/ (last access: 4 September 2019). The solar irradiance observations used in this study are available via Météo-France (http://www.meteofrance.com, last access: 4 September 2019) against payment.

Author contributions
Back to toptop
Author contributions. 

HN collected GFS, GEFS, and SatCORPS data and set up the cycling DA experiment environment. JS performed data validation and visualisation. CL created the topographical maps and processed the GHI observations. FCM, SC, LL, and GL supervised the research activity. FK devised the methodology, realised and evaluated the experiments, and wrote the paper. All authors were involved in discussions throughout the development and experiment phase, and all authors commented on the paper.

Competing interests
Back to toptop
Competing interests. 

The authors declare that they have no conflict of interest.

Acknowledgements
Back to toptop
Acknowledgements. 

We are grateful for the help of Nancy Collins and Glen Romine from the DART team at the National Center for Atmospheric Research. Moreover, we would like to thank Météo-France for providing us with the pyranometer observations via the Laboratoire de l’Atmosphère et des Cyclones.

Review statement
Back to toptop
Review statement. 

This paper was edited by Simon Unterstrasser and reviewed by two anonymous referees.

References
Back to toptop

Anderson, J., Hoar, T., Raeder, K., Liu, H., Collins, N., Torn, R., and Avellano, A.: The Data Assimilation Research Testbed: A Community Facility, B. Am. Meteorol. Soc., 90, 1283–1296, https://doi.org/10.1175/2009BAMS2618.1, 2009. a, b

Anderson, J. L.: An Ensemble Adjustment Kalman Filter for Data Assimilation, Mon. Weather Rev., 129, 2884–2903, https://doi.org/10.1175/1520-0493(2001)129<2884:AEAKFF>2.0.CO;2, 2001. a

Anderson, J. L.: An adaptive covariance inflation error correction algorithm for ensemble filters, Tellus A, 59, 210–224, https://doi.org/10.1111/j.1600-0870.2006.00216.x, 2007. a

Anderson, J. L.: Spatially and temporally varying adaptive covariance inflation for ensemble filters, Tellus A, 61, 72–83, https://doi.org/10.1111/j.1600-0870.2008.00361.x, 2009. a

Badosa, J., Haeffelin, M., and Chepfer, H.: Scales of spatial and temporal variation of solar irradiance on Reunion tropical island, Sol. Energy, 88, 42–56, https://doi.org/10.1016/j.solener.2012.11.007, 2013. a, b

Badosa, J., Haeffelin, M., Kalecinski, N., Bonnardot, F., and Jumaux, G.: Reliability of day-ahead solar irradiance forecasts on Reunion Island depending on synoptic wind and humidity conditions, Sol. Energy, 115, 306–321, https://doi.org/10.1016/j.solener.2015.02.039, 2015. a, b

Barker, D., Huang, X.-Y., Liu, Z., Auligné, T., Zhang, X., Rugg, S., Ajjaji, R., Bourgeois, A., Bray, J., Chen, Y., Demirtas, M., Guo, Y.-R., Henderson, T., Huang, W., Lin, H.-C., Michalakes, J., Rizvi, S., and Zhang, X.: The Weather Research and Forecasting Model's Community Variational/Ensemble Data Assimilation System: WRFDA, B. Am. Meteorol. Soc., 93, 831–843, https://doi.org/10.1175/BAMS-D-11-00167.1, 2012. a

Bessafi, M., Mihailović, D., Malinović-Milićević, S., Mihailović, A., Jumaux, G., Bonnardot, F., Fanchette, Y., and Chabriat, J.-P.: Spatial and Temporal Non-Linear Dynamics Analysis and Predictability of Solar Radiation Time Series for La Reunion Island (France), Entropy, 20, 946, https://doi.org/10.3390/e20120946, 2018. a

Diagne, M., David, M., Lauret, P., Boland, J., and Schmutz, N.: Review of solar irradiance forecasting methods and a proposition for small-scale insular grids, Renew. Sust. Energ. Rev., 27, 65–76, https://doi.org/10.1016/j.rser.2013.06.042, 2013. a

Dillon, M. E., Skabar, Y. G., Ruiz, J., Kalnay, E., Collini, E. A., Echevarría, P., Saucedo, M., Miyoshi, T., and Kunii, M.: Application of the WRF-LETKF Data Assimilation System over Southern South America: Sensitivity to Model Physics, Weather Forecast., 31, 217–236, https://doi.org/10.1175/WAF-D-14-00157.1, 2016. a

Dudhia, J.: Numerical Study of Convection Observed during the Winter Monsoon Experiment Using a Mesoscale Two-Dimensional Model, J. Atmos. Sci., 46, 3077–3107, https://doi.org/10.1175/1520-0469(1989)046<3077:NSOCOD>2.0.CO;2, 1989. a

Espinar, B., Blanc, P., Wald, L., Hoyer-Klick, C., Homscheidt, M. S., and Wanderer, T.: On quality control procedures for solar radiation and meteorological measures, from subhourly to monthly average time periods, EGU General Assembly, Vienna, Austria, 22–27 April, 2012. a

Gaspari, G. and Cohn, S. E.: Construction of correlation functions in two and three dimensions, Q. J. Roy. Meteor. Soc., 125, 723–757, https://doi.org/10.1002/qj.49712555417, 1999. a

Haiden, T. and Trentmann, J.: Verification of cloudiness and radiation forecasts in the greater Alpine region, Meteorol. Z., 25, 3–15, https://doi.org/10.1127/metz/2015/0630, 2015. a

Hohenegger, C. and Schär, C.: Predictability and Error Growth Dynamics in Cloud-Resolving Models, J. Atmos. Sci., 64, 4467–4478, https://doi.org/10.1175/2007JAS2143.1, 2007. a

Jones, T. A., Stensrud, D. J., Minnis, P., and Palikonda, R.: Evaluation of a Forward Operator to Assimilate Cloud Water Path into WRF-DART, Mon. Weather Rev., 141, 2272–2289, https://doi.org/10.1175/MWR-D-12-00238.1, 2013. a, b, c, d, e

Jones, T. A., Stensrud, D., Wicker, L., Minnis, P., and Palikonda, R.: Simultaneous Radar and Satellite Data Storm-Scale Assimilation Using an Ensemble Kalman Filter Approach for 24 May 2011, Mon. Weather Rev., 143, 165–194, https://doi.org/10.1175/MWR-D-14-00180.1, 2015. a, b, c, d, e

Kain, J. S.: The Kain-Fritsch Convective Parameterization: An Update, J. Appl. Meteorol., 43, 170–181, https://doi.org/10.1175/1520-0450(2004)043<0170:TKCPAU>2.0.CO;2, 2004. a

Kalnay, E.: Atmospheric Modeling, Data Assimilation, and Predictability, Cambridge University Press, New York, 2003. a

Kurzrock, F., Cros, S., Chane-Ming, F., Otkin, J. A., Hutt, A., Linguet, L., Lajoie, G., and Potthast, R.: A Review of the Use of Geostationary Satellite Observations in Regional-Scale Models for Short-term Cloud Forecasting, Meteorol. Z., 27, 277–298, https://doi.org/10.1127/metz/2018/0904, 2018. a, b, c, d

Kurzrock, F.: WRF-DART namelists for GMDD paper Kurzrock et al., 2019, Zenodo, https://doi.org/10.5281/zenodo.3354950, 2019. a

Lara-Fanego, V., Ruiz-Arias, J. A., Pozo-Vázquez, A. D., Gueymard, C. A., and Tovar-Pescador, J.: Evaluation of DNI forecast based on the WRF mesoscale atmospheric model for CPV applications, in: AIP Conference Proceedings, vol. 1477, 317–322, Toledo, Spain, 16–18 April 2012, https://doi.org/10.1063/1.4753895, 2012. a, b

López-Coto, I., Bosch, J. L., Mathiesen, P., and Kleissl, J.: Comparison between several parameterization schemes in WRF for solar forecasting in coastal zones, in: SOLAR Conference Proceedings, Baltimore, Maryland, USA, 16–20 April, 2013. a

Mass, C. F., Ovens, D., Westrick, K., and Colle, B. A.: Does Increasing Horizontal Resolution Produce More Skillful Forecasts?, B. Am. Meteorol. Soc., 83, 407–430, https://doi.org/10.1175/1520-0477(2002)083<0407:DIHRPM>2.3.CO;2, 2002. a

Minnis, P., Nguyen, L., Palikonda, R., Heck, P. W., Spangenberg, D. A., Doelling, D. R., Ayers, J. K., Smith Jr., W. L., Khaiyer, M. M., Trepte, Q. Z., Avey, L. A., Chang, F.-L., Yost, C. R., Chee, T. L., and Szedung, S.-M.: Near-real time cloud retrievals from operational and research meteorological satellites, in: Proceedings Volume 7107, Remote Sensing of Clouds and the Atmosphere XIII, p. 710703, Cardiff, Wales, UK, 15–18 September 2008, https://doi.org/10.1117/12.800344, 2008. a

Minnis, P., Sun-Mack, S., Young, D. F., Heck, P. W., Garber, D. P., Chen, Y., Spangenberg, D. A., Arduini, R. F., Trepte, Q. Z., Smith, W. L., Ayers, J. K., Gibson, S. C., Miller, W. F., Hong, G., Chakrapani, V., Takano, Y., Liou, K.-N., Xie, Y., and Yang, P.: CERES Edition-2 Cloud Property Retrievals Using TRMM VIRS and Terra and Aqua MODIS Data, Part I: Algorithms, IEEE T. Geosci. Remote, 49, 4374–4400, https://doi.org/10.1109/TGRS.2011.2144601, 2011. a

Minnis, P., Bedka, K., Trepte, Q., Yost, C. R., Bedka, S. T., Scarino, B., Khlopenkov, K., and Khaiyer, M. M.: A consistent long-term cloud and clear-sky radiation property dataset from the Advanced Very High Resolution Radiometer (AVHRR), NOAA CDR Program Document: CDRP-ATBD-0826, 19 September, 159 pp., https://doi.org/10.7289/V5HT2M8T, 2016. a, b, c

Otkin, J. A.: Clear and cloudy sky infrared brightness temperature assimilation using an ensemble Kalman filter, J. Geophys. Res.-Atmos., 115, D19207, https://doi.org/10.1029/2009JD013759, 2010. a

Otkin, J. A.: Assessing the impact of the covariance localization radius when assimilating infrared brightness temperature observations using an ensemble Kalman filter, Mon. Weather Rev., 140, 543–561, https://doi.org/10.1175/MWR-D-11-00084.1, 2012. a

Pan, Y., Zhu, K., Xue, M., Wang, X., Hu, M., Benjamin, S. G., Weygandt, S. S., and Whitaker, J. S.: A GSI-Based Coupled EnSRF-En3DVar Hybrid Data Assimilation System for the Operational Rapid Refresh Model: Tests at a Reduced Resolution, Mon. Weather Rev., 142, 3756–3780, https://doi.org/10.1175/MWR-D-13-00242.1, 2014. a

Pérez, J. C., Díaz, J. P., González, A., Expósito, J., Rivera-López, F., and Taima, D.: Evaluation of WRF Parameterizations for Dynamical Downscaling in the Canary Islands, J. Climate, 27, 5611–5631, https://doi.org/10.1175/JCLI-D-13-00458.1, 2014. a

Rigollier, C., Bauer, O., and Wald, L.: On the clear sky model of the ESRA – European Solar Radiation Atlas – with respect to the heliosat method, Sol. Energy, 68, 33–48, https://doi.org/10.1016/S0038-092X(99)00055-9, 2000. a

Ruiz-Arias, J. A., Arbizu-Barrena, C., Santos-Alamillos, F. J., Tovar-Pescador, J., and Pozo-Vázquez, D.: Assessing the Surface Solar Radiation Budget in the WRF Model: A Spatiotemporal Analysis of the Bias and Its Causes, Mon. Weather Rev., 144, 703–711, https://doi.org/10.1175/MWR-D-15-0262.1, 2016. a

Schmela, M., Beauvais, A., Chevillard, N., Guillén Paredes, M., Heisz, M., and Rossi, R.: Global Market Outlook for Solar Power 2018–2022, Tech. rep., SolarPower Europe, available at: http://www.solarpowereurope.org/global-market-outlook-2018-2022/ (last access: 4 September 2019), 2018. a

Schraff, C., Reich, H., Rhodin, A., Schomburg, A., Stephan, K., Periáñez, A., and Potthast, R.: Kilometre-scale ensemble data assimilation for the COSMO model (KENDA), Q. J. Roy. Meteor. Soc., 142, 1453–1472, https://doi.org/10.1002/qj.2748, 2016. a

Sengupta, M., Habte, A., Gueymard, C., Wilbert, S., Renné, D., and Stoffel, T.: Best Practices Handbook for the Collection and Use of Solar Resource Data for Solar Energy Applications: Second Edition, Technical Report, National Renewable Energy Laboratory (NREL), 2017. a

Shepard, D.: A two-dimensional interpolation function for irregularly-spaced data, in: Proceedings of the 1968 23rd ACM national conference, 517–524, New York, NY, USA, 27–29 August 1968, https://doi.org/10.1145/800186.810616, 1968.  a

Skamarock, W. C., Klemp, J. B., Dudhia, J., Gill, D. O., Barker, D. M., Duda, M. G., Huang, X.-Y., Wang, W., and Powers, J. G.: A Description of the Advanced Research WRF Version 3, NCAR Technical Note NCAR/TN-475+STR, National Center for Atmospheric Research, Boulder, CO, 2008. a

Stöckli, R.: Aerosol Optical Thickness, available at: https://neo.sci.gsfc.nasa.gov/view.php?datasetId=MYDAL2_M_AER_OD (last access: 4 September 2019), 2018. a

Thompson, G., Field, P. R., Rasmussen, R. M., and Hall, W. D.: Explicit Forecasts of Winter Precipitation Using an Improved Bulk Microphysics Scheme. Part II: Implementation of a New Snow Parameterization, Mon. Weather Rev., 136, 5095–5115, https://doi.org/10.1175/2008MWR2387.1, 2008. a

Trepte, Q. Z., Minnis, P., Sun-Mack, S., Yost, C. R., Chen, Y., Jin, Z., Chang, F.-L., Smith, William L., J., Bedka, K. M., and Chee, L.: Global Cloud Detection for CERES Edition 4 Using Terra and Aqua MODIS Data, IEEE T. Geosci. Remote, in review, 2019. a

UCAR: WRF Physics Use Survey, Tech. rep., available: http://www2.mmm.ucar.edu/wrf/users/(last access: 4 September 2019), 2015. a

Verbois, H., Huva, R., Rusydi, A., and Walsh, W.: Solar irradiance forecasting in the tropics using numerical weather prediction and statistical learning, Sol. Energy, 162, 265–277, https://doi.org/10.1016/j.solener.2018.01.007, 2018. a

Yang, H. and Kleissl, J.: Preprocessing WRF initial conditions for coastal stratocumulus forecasting, Sol. Energy, 133, 180–193, https://doi.org/10.1016/j.solener.2016.04.003, 2016. a

Ying, Y., Zhang, F., and Anderson, J. L.: On the Selection of Localization Radius in Ensemble Filtering for Multiscale Quasigeostrophic Dynamics, Mon. Weather Rev., 146, 543–560, https://doi.org/10.1175/MWR-D-17-0336.1, 2018. a

Zhou, X., Liu, Y., Lin, W., Endo, S., and Yoo, S.: Exploring Effects of Cloud Microphysics and Domain Size on Surface Solar Radiation Using a New WRF-Solar Based Evaluation Framework, AGU Fall Meeting 2018, Washington DC, USA, 10–14 December, 2018. a, b

Publications Copernicus
Download
Short summary
This study assesses the assimilation of cloud water path retrievals in three phases (ice, supercooled, and liquid), derived from Meteosat-8, into a limited-area model using an ensemble Kalman filter (EnKF). The ability of the method to improve cloud analyses in the southwest Indian Ocean and short-term forecasts of global horizontal irradiance on Réunion Island is demonstrated using the Data Assimilation Research Testbed (DART) and the Weather Research and Forecasting (WRF) model.
This study assesses the assimilation of cloud water path retrievals in three phases (ice,...
Citation