Journal cover Journal topic
Geoscientific Model Development An interactive open-access journal of the European Geosciences Union
Journal topic

Journal metrics

Journal metrics

  • IF value: 4.252 IF 4.252
  • IF 5-year value: 4.890 IF 5-year 4.890
  • CiteScore value: 4.49 CiteScore 4.49
  • SNIP value: 1.539 SNIP 1.539
  • SJR value: 2.404 SJR 2.404
  • IPP value: 4.28 IPP 4.28
  • h5-index value: 40 h5-index 40
  • Scimago H index value: 51 Scimago H index 51
Volume 6, issue 2
Geosci. Model Dev., 6, 445-456, 2013
https://doi.org/10.5194/gmd-6-445-2013
© Author(s) 2013. This work is distributed under
the Creative Commons Attribution 3.0 License.
Geosci. Model Dev., 6, 445-456, 2013
https://doi.org/10.5194/gmd-6-445-2013
© Author(s) 2013. This work is distributed under
the Creative Commons Attribution 3.0 License.

Model evaluation paper 03 Apr 2013

Model evaluation paper | 03 Apr 2013

Evaluation of roadway Gaussian plume models with large-scale measurement campaigns

R. Briant1, C. Seigneur1, M. Gadrat2, and C. Bugajny2 R. Briant et al.
  • 1CEREA, Joint Research Laboratory École des Ponts ParisTech/EDF R&D, Université Paris-Est, 6–8 avenue Blaise Pascal, Cité Descartes, Champs-sur-Marne, 77455 Marne-la-Vallée Cedex 2, France
  • 2CETE Nord-Picardie, Equipment Technical Study Center for the Nord-Picardie region in France, 42 bis rue Marais Sequedin – BP 10099, 59482 Haubourdin Cedex, France

Abstract. Gaussian models are commonly used to simulate atmospheric pollutant dispersion near sources because they provide an efficient compromise between reasonable accuracy and manageable computational time. The Gaussian dispersion formula provides an exact solution to the atmospheric diffusion equation for the dispersion of a pollutant emitted from a point source. However, the Gaussian dispersion formula for a line source, which is convenient to model emissions from on-road traffic, is exact only when the wind is perpendicular to the line source. A novel approach that reduces the error in the line source formula when the wind direction is not perpendicular to the road was recently developed. This model is used to simulate NOx concentrations in a large case study (1371 road sections representing about 831 km). NO2, NO and O3 concentrations are then computed using the photostationary-state approximation. NO2 concentrations are compared with measurements made at 242 locations in the domain area. Model performance is satisfactory with mean normalised errors of 22% (winter month) to 31% (summer month). Results obtained here are also compared with those obtained with a previous formulation and with a standard model used for regulatory applications, ADMS-Urban. Discrepancies among the results obtained with those models are discussed.

Publications Copernicus
Download
Citation
Share